Exploring Wavefront Detection in Imaging Systems with Rectangular Apertures Using Phase Diversity.

The attainment of a substantial aperture in the rotating synthetic aperture imaging system involves the rotation of a slender rectangular primary mirror. This constitutes a pivotal avenue of exploration in space telescope research. Due to the considerable aspect ratio of the primary mirror, environmental disturbances can significantly impact its surface shape. Active optical technology can rectify surface shape irregularities through the detection of wavefront information. The Phase Diversity (PD) method utilizes images captured by the imaging system to compute wavefront information. In this study, the PD method is applied to rotating synthetic and other rectangular aperture imaging systems, employing Legendre polynomials to model the wavefront. The study delved into the ramifications stemming from the aperture aspect ratio and aberration size.

Existence, uniqueness, and galerkin shifted Legendre's approximation of time delays integrodifferential models by adapting the Hilfer fractional attitude.

Guaranteeing the uniqueness of the solution will simplify the analysis and provide a clear approximation of the considered problem. This article presents theoretical proof of the presence of a unique solution and leverages approximation for the time delay functions in integrodifferential models in the sense of the Hilfer fractional approach. Once the wellposedness discussion is done, our focus lies on utilizing the Galerkin pseudo-codes based on the OSLPs to generate an approximation by applying GSLM as follows: utilizing the OSLPs to replace the required functions in main Hilfer model, applying the Galerkin pseudo-codes, and transforming Hilfer model into an algebraic system of equations. Herein, the wellposedness is proven by utilizing the fixed point of Banach and the principle of contraction mapping. The proposed scheme is shown to provide efficient, flawless, and expedient solutions for the needed Hilfer fractional delay model. Whilst, the effectiveness of the approach is demonstrated by various delayed examples in comparison with the classical solution. Tabulated and plotted results of the study provide a novel reliable scheme for handling such a Hilfer delayed integrodifferential model. Eventually, valuable noteworthy points and suggestions for future endeavors have been offered.

Modelling the lactation curve in Alpine × Beetal crossbred dairy goats using random regression models fitted with Legendre polynomial and B-spline functions.

The current study sought to genetically assess the lactation curve of Alpine × Beetal crossbred goats through the application of random regression models (RRM). The objective was to estimate genetic parameters of the first lactation test-day milk yield (TDMY) for devising a practical breeding strategy within the nucleus breeding programme. In order to model variations in lactation curves, 25,998 TDMY records were used in this study. For the purpose of estimating genetic parameters, orthogonal Legendre polynomials (LEG) and B-splines (BS) were examined in order to generate suitable and parsimonious models. A single-trait RRM technique was used for the analysis. The average first lactation TDMY was 1.22 ± 0.03 kg and peak yield (1.35 ± 0.02 kg) was achieved around the 7th test day (TD). The present investigation has demonstrated the superiority of the B-spline model for the genetic evaluation of Alpine × Beetal dairy goats. The optimal random regression model was identified as a quadratic B-spline function, characterized by six knots to represent the central trend. This model effectively captured the patterns of additive genetic influences, animal-specific permanent environmental effects (c2 ) and 22 distinct classes of (heterogeneous) residual variance. Additive variances and heritability (h2 ) estimates were lower in the early lactation, however, moderate across most parts of the lactation studied, ranging from 0.09 ± 0.04 to 0.33 ± 0.06. The moderate heritability estimates indicate the potential for selection using favourable combinations of test days throughout the lactation period. It was also observed that a high proportion of total variance was attributed to the animal's permanent environment. Positive genetic correlations were observed for adjacent TDMY values, while the correlations became less pronounced for more distant TDMY values. Considering better fitting of the lactation curve, the use of B-spline functions for genetic evaluation of Alpine × Beetal goats using RRM is recommended.

Lamb Waves Propagation Characteristics in Functionally Graded Sandwich Plates.

Functionally graded materials (FGM) have received extensive attention in recent years due to their excellent mechanical properties. In this research, the theoretical process of calculating the propagation characteristics of Lamb waves in FGM sandwich plates is deduced by combining the FGM volume fraction curve and Legendre polynomial series expansion method. In this proposed method, the FGM plate does not have to be sliced into multiple layers. Numerical results are given in detail, and the Lamb wave dispersion curves are extracted. For comparison, the Lamb wave dispersion curve of the sliced layer model for the FGM sandwich plate is obtained by the global matrix method. Meanwhile, the FGM sandwich plate was subjected to finite element simulation, also based on the layered-plate model. The acoustic characteristics detection experiment was performed by simulation through a defocusing measurement. Thus, the Lamb wave dispersion curves were obtained by V(f, z) analysis. Finally, the influence of the change in the gradient function on the Lamb wave dispersion curves will be discussed.

Return Probability of Quantum and Correlated Random Walks.

The analysis of the return probability is one of the most essential and fundamental topics in the study of classical random walks. In this paper, we study the return probability of quantum and correlated random walks in the one-dimensional integer lattice by the path counting method. We show that the return probability of both quantum and correlated random walks can be expressed in terms of the Legendre polynomial. Moreover, the generating function of the return probability can be written in terms of elliptic integrals of the first and second kinds for the quantum walk.

Computed tomography image representation using the Legendre polynomial and spherical harmonics functions.

The representation of computed tomography (CT) images using the Legendre polynomial (LPF) and spherical harmonics (SHF) functions was investigated. We selected 100 two-dimensional (2D) CT images of 10 lung cancer patients and 33 three-dimensional (3D) CT images of head and neck cancer patients. The reproducibility of these special functions was evaluated in terms of the normalized cross-correlation (NCC). For the 2D images, the NCC was 0.990 ± 0.002 (1sd) with an LPF of order 70, whereas for the 3D images, the NCC was 0.971 ± 0.004 (1sd) with an SHF of degree 70. The results showed that the LPF was more efficient than the Fourier series. As the thoracic and head areas are cylindrical and spherical, respectively, expansions with the LPF and SHF achieved an efficient representation of the human body. CT image representation with analytical functions can be potentially beneficial, such as in X-ray scattering estimation.

Using random regression models to estimate genetic variation in growth pattern and its association with sexual maturity of Thai native chickens.

1. Genetic (co)variances and parameters between body weights (BW) across the growth trajectory were estimated using a univariate random regression (RR) animal model. The effect of growth rates (GH) on age at first egg (AFE) and egg weight at first egg (EWFE) were explored using a series of univariate and bivariate analyses. 2. Body weights were taken from Thai native chickens at hatch day to 168 days of age. The model included interactions between age with hatch nested within year and sex as fixed effects, and random effects of direct additive genetic, direct permanent environmental, maternal genetic and maternal permanent environmental effects. All random effects were fitted as regressions to animals' age via quadratic Legendre polynomials and fitting six classes of residual variances was identified as an optimal variance structure to estimate parameters. 3. Genetic and phenotypic variances for BW increased with increasing age. Estimated heritabilities for direct additive (h2 a) and maternal genetic (h2 m) effects on BW traits ranged from 0.34 to 0.54, and 0.04 to 0.06, respectively. Estimated variance ratios for direct (c2 ape) and maternal permanent environmental (c2 mpe) effects ranged from 0.19 to 0.48 and 0.10 to 0.12, respectively. Estimated correlations between weights at different ages were high for all random effects. 4. Estimated h2 a for six GH traits ranged from 0.06 to 0.28, while for AFE and EWFE these were 0.24 and 0.16, respectively. Estimated h2 m and c2 mpe were low for GH. Estimated genetic correlations between GH and AFE ranged from -0.22 to 0.02 and, between GH and EWFE, ranged from -0.05 to 0.40. These estimates suggested that selecting high GH chickens at 28 days of age can be expected to reduce AFE and to increase EWFE.

Modeling guided wave propagation in functionally graded plates by state-vector formalism and the Legendre polynomial method.

A numerical method is presented for the investigation of the propagation characteristic of guided waves in functionally gradient material (FGM) plates. Based on the State-vector formalism and Legendre polynomial method, the typical non-stratified computing of dispersion curves of FGMs is realized, by introducing the univariate nonlinear regression to optimize the arbitrary gradient distribution of material component. Comparing with the conventional Matrix method, the proposed method avoids the exhausting root-locating algorithm of solving the transcendental equation by a single-variable scanning process. This method turns it into an algebraic eigenvalue problem, which mainly depends on the orthogonal completeness and strong recursive property of Legendre polynomial series. It provides a fast and flexible approach to extracting the dispersion curves, displacement distribution and stress profile, simultaneously. Results from chrome-ceramic FGM plate are compared with those from the previous articles to confirm the feasibility and accuracy of the proposed method. Then, this approach is further applied to iron based alumina FGM. The dispersion curves with different gradient function are calculated to illustrate the influence of the gradient variation. Moreover, the influence of the cut-off order of Legendre orthogonal polynomials on the convergence of dispersion curves is also revealed through numerical examples. Utilizing the mapping relationship between the gradient distribution and the propagation characteristics, it gives theoretical support for nondestructive evaluation and quantitative estimation of the structural characteristics of FGM plates.

Polynomial order selection in random regression models via penalizing adaptively the likelihood.

Orthogonal Legendre polynomials (LP) are used to model the shape of additive genetic and permanent environmental effects in random regression models (RRM). Frequently, the Akaike (AIC) and the Bayesian (BIC) information criteria are employed to select LP order. However, it has been theoretically shown that neither AIC nor BIC is simultaneously optimal in terms of consistency and efficiency. Thus, the goal was to introduce a method, 'penalizing adaptively the likelihood' (PAL), as a criterion to select LP order in RRM. Four simulated data sets and real data (60,513 records, 6675 Colombian Holstein cows) were employed. Nested models were fitted to the data, and AIC, BIC and PAL were calculated for all of them. Results showed that PAL and BIC identified with probability of one the true LP order for the additive genetic and permanent environmental effects, but AIC tended to favour over parameterized models. Conversely, when the true model was unknown, PAL selected the best model with higher probability than AIC. In the latter case, BIC never favoured the best model. To summarize, PAL selected a correct model order regardless of whether the 'true' model was within the set of candidates.

Estimates of genetic parameters and eigenvector indices for milk production of Holstein cows.

The objectives of the present study were to estimate genetic parameters of monthly test-day milk yield (TDMY) of the first lactation of Brazilian Holstein cows using random regression (RR), and to compare the genetic gains for milk production and persistency, derived from RR models, using eigenvector indices and selection indices that did not consider eigenvectors. The data set contained monthly TDMY of 3,543 first lactations of Brazilian Holstein cows calving between 1994 and 2011. The RR model included the fixed effect of the contemporary group (herd-month-year of test days), the covariate calving age (linear and quadratic effects), and a fourth-order regression on Legendre orthogonal polynomials of days in milk (DIM) to model the population-based mean curve. Additive genetic and nongenetic animal effects were fit as RR with 4 classes of residual variance random effect. Eigenvector indices based on the additive genetic RR covariance matrix were used to evaluate the genetic gains of milk yield and persistency compared with the traditional selection index (selection index based on breeding values of milk yield until 305 DIM). The heritability estimates for monthly TDMY ranged from 0.12 ± 0.04 to 0.31 ± 0.04. The estimates of additive genetic and nongenetic animal effects correlation were close to 1 at adjacent monthly TDMY, with a tendency to diminish as the time between DIM classes increased. The first eigenvector was related to the increase of the genetic response of the milk yield and the second eigenvector was related to the increase of the genetic gains of the persistency but it contributed to decrease the genetic gains for total milk yield. Therefore, using this eigenvector to improve persistency will not contribute to change the shape of genetic curve pattern. If the breeding goal is to improve milk production and persistency, complete sequential eigenvector indices (selection indices composite with all eigenvectors) could be used with higher economic values for persistency. However, if the breeding goal is to improve only milk yield, the traditional selection index is indicated.

Modelos de regressão aleatória para avaliação da curva de crescimento em matrizes de codorna de corte / Random regression models for growth evaluation of meat-type quail hens

Objetivou-se comparar diferentes modelos de regressão aleatória por meio de funções polinomiais de Legendre de diferentes ordens, para avaliar o que melhor se ajusta ao estudo genético da curva de crescimento de codornas de corte. Foram avaliados dados de 2136 matrizes de codorna de corte, dos quais 1026 pertenciam ao grupo genético UFV1 e 1110 ao grupo UFV2. As codornas foram pesadas nos 1°, 7°, 14°, 21°, 28°, 35°, 42°, 77°, 112° e 147° dias de idade e seus pesos utilizados para a análise. Foram testadas duas possíveis modelagens de variância residual heterogênea, sendo agrupadas em 3 e 5 classes de idade. Após, foi realizado o estudo do modelo de regressão aleatória que melhor aplica-se à curva de crescimento das codornas. A comparação entre os modelos foi feita pelo Critério de Informação de Akaike (AIC), Critério de Informação Bayesiano de Schwarz (BIC), Logaritmo da função de verossimilhança (Log e L) e teste da razão de verossimilhança (LRT), ao nível de 1%. O modelo que considerou a heterogeneidade de variância residual CL3 mostrou-se adequado à linhagem UFV1, e o modelo CL5 à linhagem UFV2. Uma função polinomial de Legendre com ordem 5, para efeito genético aditivo direto e 5 para efeito permanente de animal, para a linhagem UFV1 e, com ordem 3, para efeito genético aditivo direto e 5 para efeito permanente de animal para a linhagem UFV2, deve ser utilizada na avaliação genética da curva de crescimento das codornas de corte.

The objective was to compare different random regression models using Legendre polynomial functions of different orders, to evaluate what best fits the genetic study of the growth curve of meat quails. It was evaluated data from 2136 cut dies quail, of which 1026 belonged to genetic group UFV1 and 1110 the group UFV2. Quail were weighed at 10, 70, 140, 210, 280, 350, 420, 770, 1120 and 1470 days of age, and weights used for the analysis. It was tested two possible modeling of heterogeneous residual variance, which was grouped into three five age classes. After, it was studied the random regression mode, which is better applied to the growth curve quail. The comparison between models was made by the Akaike Information Criterion (AIC), Bayesian Information Criterion of Schwarz (BIC), logarithm of the likelihood function (Loge L) and the likelihood ratio test (LRT), at 1%. The model which considered the heterogeneity of residual variance CL3 was adequate to UFV1 lineage and the lineage model CL5 UFV2. A Legendre polynomial with order 5, for direct genetic effect and 5 for the permanent animal to UFV1 bloodline and order 3 for direct genetic effect and 5 for the permanent animal for UFV2 bloodline should be used in genetic evaluation of the growth curve of meat quails.

Avaliação da persistência na lactação da raça Guzerá, utilizando modelos de regressão aleatória / Evaluation of lactation persistency of Guzerat cows using random regression models

Estimaram-se a herdabilidade e as correlações genéticas e de ambiente permanente entre seis medidas de persistência da lactação de vacas da raça Guzerá, utilizando modelo de regressão aleatória. Foram considerados 8276 registros de produção de leite no dia do controle, na primeira lactação, de 1021 vacas. A regressão aleatória foi calculada pela função logarítmica de Ali e Schaeffer e pelo polinômio de Legendre, obtendo-se os coeficientes para os efeitos fixos, genético aditivo e de ambiente permanente. A função que mais se adequou aos dados foi a de Ali e Schaeffer, mas apresentou problemas de convergência. Os resultados evidenciaram que a persistência é uma característica com herdabilidade de valor moderado e de baixa correlação com o valor genético para produção de leite aos 305 dias, indicando a possibilidade de se obter resposta à seleção para mudança na curva de lactação sem afetar negativamente a produção total de leite na lactação. A medida de persistência que calcula a diferença de produção de leite entre as fases intermediária e inicial da lactação apresentou alta correlação com a produção aos 305 dias.

The heritability and the genetic and permanent environment correlations were estimated among six different measures of persistency in the lactation of Guzerat cow, using the Random Regression Model. A total of 8,403 records from 1,034 first lactation cows were evaluated. The Random Regression Model was calculated by the logarithmic function of Ali and Schaeffer and Legendre polynomials to get coefficients for fixed, additive genetic and permanent environment effects. Ali and Schaeffer was the function that better fit to the data, but it had convergence problems. The results showed that persistence is a trait with moderate heritability, and low correlation with genetic value for 305-d milk production which allows to select animals in order to alter the format of the curve of production without affecting the total productivity. The measure of persistence that calculates the difference of milk production between the medium and initial phases was highly correlated with 305-d milk production.

Persistência na lactação para vacas da raça Holandesa criadas no Estado do Rio Grande do Sul via modelos de regressão aleatória / Lactation persistency for Holstein cows raised in the State of Rio Grande do Sul using a random regression model

Foram utilizados 21.702 registros de produção de leite no dia do controle de 2.429 vacas primíparas da raça Holandesa, filhas de 233 touros, coletados em 33 rebanhos do Estado do Rio Grande do Sul, entre 1992 e 2003, para estimar parâmetros genéticos, para três medidas de persistência (PS1, PS2 e PS3) e para a produção de leite até 305 dias (P305) de lactação. Os modelos de regressão aleatória ajustados aos controles leiteiros entre o sexto e o 300o dia de lactação incluíram o efeito de rebanho-ano-mês do controle, a idade da vaca ao parto e os parâmetros do polinômio de Legendre de ordem quatro, para modelar a curva média da produção de leite da população e os parâmetros do mesmo polinômio, para modelar os efeitos aleatórios genético-aditivo direto e de ambiente permanente. As estimativas de herdabilidade obtidas foram 0,05, 0,08 e 0,19, respectivamente, para PS1, PS2 e PS3 e 0,25, para P305 sugerindo a possibilidade de ganho genético por meio da seleção para PS3 e para P305. As correlações genéticas entre as três medidas de persistência e P305, variaram de -0,05 a 0,07, indicando serem persistência e produção, características determinadas por grupos de genes diferentes. Assim, consequentemente, a seleção para P305, geralmente praticada, não promove progresso genético para a persistência.

There were used 21,702 test day milk yields from 2,429 first parity Holstein breed cows, daughters of 2,031 dams and 233 sires, distributed over 33 herds in the state of Rio Grande do Sul, from 1992 to 2003. Genetic parameters for three measures of lactation persistency (PS1, PS2 e PS3) and for milk production to 305 days (P305) were evaluated. A random regression model adjusted by fourth order Legendre polynomial was used. The random regression model adjusted to test day between the sixth and the 305th lactation day included the herd-year-season of the test day, the age of the cow at the parturition effects and the order fourth Legendre polinomial parameters, for modeling the milk production average curve of the population, and parameters of the same polinomial for modeling the random additive genetic and permanent environmental effects. The estimated heritabilities were 0.05, 0.08 and 0.19, respectively to PS1, PS2 and PS3, and 0.25 to P305, suggesting the possibility of a genetic gain by selection for PS3 and P305. The genetic correlations between persistency measurements and P305 ranged from -0.05 to 0.07, suggesting being, persistency and milk yield, characteristics determined by different gene groups, and that the selection for P305, usually done, do not promote genetic progress for persistency.

Estimação de parâmetros genéticos para produção de leite de vacas da raça Holandesa via regressão aleatória / Estimation of genetic parameters for Holstein cows milk production by random regression

Foram utilizados 21.702 registros de produção de leite no dia do controle de 2.429 vacas primíparas da raça Holandesa, filhas de 233 touros, coletados em 33 rebanhos do Estado do Rio Grande do Sul, para estimar parâmetros genéticos para produção de leite no dia do controle. O modelo de regressão aleatória ajustado aos controles leiteiros entre o sexto e o 305º dia de lactação incluiu o efeito de rebanho-ano-mês do controle, idade da vaca no parto e os parâmetros do polinômio de Legendre de ordem quatro, para modelar a curva média da produção de leite da população e parâmetros do mesmo polinômio, para modelar os efeitos aleatórios genético-aditivo e de ambiente permanente. As variâncias genéticas e de ambiente permanente para produção de leite no dia do controle variaram, respectivamente, de 2,38 a 3,14 e de 7,55 a 10,35. As estimativas de herdabilidade aumentaram gradativamente do início (0,14) para o final do período de lactação (0,20), indicando ser uma característica de moderada herdabilidade. As correlações genéticas entre as produções de leite de diferentes estágios leiteiros variaram de 0,33 a 0,99 e foram maiores entre os controles adjacentes. As correlações de ambiente permanente seguiram a mesma tendência das correlações genéticas. O modelo de regressão aleatória com polinômio de Legendre de ordem quatro pode ser considerado como uma boa ferramenta para estimação de parâmetros genéticos para a produção de leite ao longo da lactação.

A total of 21,702 records of milk production from 2,429 first-lactation Holstein cows, sired by 233 bulls, collected in 33 herds in the State of Rio Grande do Sul from 1991 to 2003, were used to estimate genetic parameters for that characteristic. The random regression model adjusted to test day from the 6th and the 305th lactation day included the effect of herd-year-month of the test day, the age of the cow at parturition, and the order fourth Legendre polynomial parameters, in order to obtain the average curve for the milk production of the population and parameters from the same polynomial to estimate the additive genetic and permanent environmental random effects. The genetic and permanent environmental variances for test day milk yield ranged from 2.38 to 3.14 and from 7.55 to 10.35, respectively. The estimated heritabilities gradually increased from the beginning (0.14) to the end (0.20) of the lactation period, indicating that test day milk yield is a characteristic with moderate heritability. The genetic correlation between milk yield in different phases of lactation ranged from 0.33 to 0.99 and was higher between the adjacent test days. The permanent environmental correlations followed the same tendency of the genetic ones. The random regression animal model using Legendre polynomials of order four can be considered as a good tool to estimate genetic parameters for milk production throughout the lactation.